Matches 1 - 50 out of 150 1 2 3 >


Match Document Document Title
224335603 FMEA analysis of Xeikon electrophotographics.  
By introducing FMEA analysis of Xeikon DCP32D electrophotographic printing model it is shown which components of the machine are weakest link in the printing. Each component is shown separately...
224335602 Water treatment plant for a rolling-mill train.  
Water treatment plants consist in systems where water is treated and subjected to diverse processes based on the intended industrial use of the water. In the case of treatment plants for water...
224335601 Microsegmentation in telecom market: data mining approach.  
The aim of this paper is to present the benefits of data mining in the field of telecommunication. In this research, we will present how cluster analysis can be used as a substitute method for...
224335600 Knowledge representation database for the development of tolerances and fits in design.  
This paper describes the architecture of TFDES (Tolerances and Fits in Design Expert System), an expert system for fit choosing in a CAD (Computer Aided Design) environment and presents how recent...
224335599 Influence of coating and tool geometry on the tool life.  
The paper deals with the influence of coatings on the tool life of the different shapes of taps in a thread cutting process. The PVD procedure was employed in order to apply a TiAlN coating on the...
224335598 Surface roughness study of UNS A97050-T7 bars obtained by dry turning.  
The main goal of this study is to analyse the relationship between the surface roughness obtained during the dry turning of aluminium UNS A97050--T7 bars and the cutting parameters (cutting speed...
224335597 Of flexibile manufacturing systems.  
Setting up a flexible manufacturing system (FMS) resembles with the manufacturing assimilation of a new product, particularly of a machine-tool. Consequently, the function of annual expenses...
224335596 Evaluation criteria of the human resources' performances in the S.M.E.-s.  
A functional and competitive economy implies the coexistence of large enterprises with small and middle enterprises. The large firms aim to control the market's directions of evolution and...
224335595 Influence of the printing process on the quality of AGX printing plates.  
One of the most important features in lithography is the stability of the printing plates during the printing process. It is highly influenced by the consistency and the wear of the photoactive...
224335594 Multi variant process plans.  
The article deals with the use of computer aided process planning in relation to the characteristics of the European market. It introduces the method of "multi-variable process plans" dedicated...
224335593 Connection of NC/CNC manufacturing and reverse engineering.  
The contribution deals with the process of complex-shaped parts modelling and generation within the Reverse Engineering. Many of the hand-made prototypes are created without drawing documentation...
224335592 Temperature measurements in a pump cylinder block.  
A method for temperature measurement in the cylinder block of a piston axial pump is presented. The method employs an electronic measuring system with an optoelectronic sensor, designed be the...
224335591 New solution of the technological process of pressure casting die.  
In this paper new solution of the technological process of movable and immovable pressure casting die insert of pump executed in one of motor industrial plant was presented.
224335590 Studies on stress and strain state of a hip joint endoprosthesis.  
The paper presents a study on a hip joint endoprosthesis. The model for the femur was obtained by CT scanner and Mimics, the endoprosthezis was designed in proEngineer. The paper deals with some...
224335589 A grammatical model of the multi-agent system.  
Multi-agent sensor operation is presented of the processing of some attributes grammar. Words defined in the grammar are signals from the sensing elements of the sensor system. Processing of these...
224335588 Genetic algorithm vs. reinforcement learning.  
The flow-shop scheduling problem is a very important practical problem. The main goal of this scientific work is to take a survey of the solution methods of permutation flow-shop scheduling...
224335587 Real-time data transmission protocols for industrial networks.  
The following report summarizes the aspects that have to be considered during design and set-up of connections for multimedia through IP-based networks in industrial environments. Especially...
224335586 Prediction of cutting forces in the dry machining of lights alloys.  
This paper analyses the relationship between the cutting forces and length, according to experimental results obtained in lights alloys, in particular UNS A97050-T7, UNS A92024-T3, during the dry...
224335585 A transfer matrix method for study of vibrations of plane bars systems.  
In this paper we study the simultaneous vibrations of bars systems, considering as been continuous medium. We obtained for the transfer matrix method because the finite elements method introduces...
224335584 Computer aided design of light-technical projects.  
The condition and development of artificial lighting it's a way of expression of economical and energetic situation of state, criterion of substantial and cultural levels of citizens....
224335583 Remote monitoring of parameters for a pressure transducer through HART protocol and LabView environment.  
In this paper we used the concepts of remote control for automated monitoring of parameters for a pressure transducer with sensitive piezorezistive element. The application can monitor the...
224335582 Corporate image management in municipal utility companies.  
The basic objective of this scientific essay is to determine and evaluate the current image of utility companies in the city of Rijeka. In order to attain the objective of the research, a "face...
224335581 Screen element shape "R73" mutation.  
The paper describes research on creating a new shape of screening cell definition that has not even existed to date. Therefore it has not been researched nor applied yet. A novelty of this paper...
224335580 Characteristics of the church in Gorica near Livno.  
In the world, application of reinforced concrete for construction of civil engineering structures began in last decades of the 19th century. In our areas, it is only in the beginning of the 20th...
224335579 Intelligent microengineering.  
The scientific manuscript entitled Intelligent Microengineering is treating a mixture of concepts, fundaments and aplicative techniques regarding the mecathtonics field / micro-nanomecatronics,...
224335578 Improving channel flow with deflectors optimized using a genetic algorithm.  
This paper summarizes the optimization process for deflectors designed to lower the water level and ceiling overflow in the S-shaped outflow channel of HPP Vinodol. Parameterized designs of...
224335577 The application of interval computation on non-linear state estimation.  
This paper present using interval analysis on nonlinear state estimation, in this concretely case of Permanent Magnet Synchronous Machine. In modern control theory, the mere knowledge of input...
224335576 Gamut of ink Jet prints in function of the environment.  
The aim of this work is the result presentation of the gamut investigations of ink jet prints obtained: immediately after the printing, including the print drying phase, the ageing of prints in...
224335575 Chromatic characteristics of the recycled fibers.  
In the field of sustainable design an important place occupies life cycle of printed products. One of the possibilities to increase the quality of the environment in this area arises from the...
224335574 The friction effect in the serial sonic circuit.  
In this paper we present the practical application of the thermal effect in the theory of sonicity. The sonic actions permit the best combination of facilities offered by the processing of...
224335573 Modeling of Bosnia-Herzegovina growth population.  
The main topic of this work is modeling of the population growth in Bosnia and Herzegovina until 2050, by using logistic model with logistic equations and the official data from very last reliable...
224335572 Design of production systems for the machine and plant engineering industry.  
Within the context of design and implementation of a customized comprehensive production system, many industrial companies are coping with the issue of how the subsystems respectively principles...
224335571 A conceptual design application based on a new generalized algorithm.  
Based on a new algorithm variant of the conceptual design modeling, proposed by the authors, an application of this algorithm is analyzed on a product of motor--planetary reducer type. According...
224335570 Studies concerning the adherence strength of some thermoglued textile ensembles.  
The paper approaches a less treated topic by the specialists from textile clothing field: the adherence of the thermo-glued under ensembles. This characteristic influences in a big extent the...
224335569 Integrating geometry information in the bid generation of die casting moulds.  
An analysis in the tool and mould making sector showed that methods insufficiently support the manufacturers of die casting moulds in the bid generation process. The primary aim of bid generation...
224335568 Computer-aided assessment of the quality of small-sized cast parts.  
Quality is an important issue in casting, but it becomes essential in the case of small-size cast parts, such as dental prosthetic elements. As in most other areas of manufacturing, numerical...
224335567 Surface microstructuring of PES fabrics by UV laser irradiation.  
In this study, laser was used to treat PES fabrics. The effects of laser treatment on the surface morphology of the fibres were characterized using scanning electron microscopy (SEM) and atomic...
224335566 Paper recycling efficiency in function of the typeface.  
Eco-design has become very important in last few years. According to the environmental suggestions not to waste materials, energy etc., and use of recycle materials we were study paper recycling...
224335565 Implementation of automobile assembly system using AR technology.  
Today, increasing global competition demands that automobile manufacturers reduce costs and time in the implementation of manufacturing systems. AR (augmented reality) technology as a...
224335564 Reduction of C[O.sub.2] emissions in production of corn in Slovenia.  
Soil tillage is one of the greatest energy consumers and a contributor to C[O.sub.2] emission in agriculture. Conventional tillage with mouldboard plough, rotary harrow and seeding (CT); reduced...
224335563 Research on the mechanical and chemical resistance of prints.  
Flexographic printing process is a fast growing printing technique, whereby it became a more competitive printing method in the packaging production. Flexographic printing process is a quality...
224335562 Alumina ceramics corrosion behaviour estimated by artificial neural networks.  
Artificial neural network models were used for estimation of corrosion behaviour of a cold isostatically pressed (CIP) high-purity alumina ceramics in aqueous HCl solution. Corrosion tests were...
224335561 Optimized CFRAL composite for advanced aerospace applications.  
The research depicted in this paper thoroughly investigates the design, production and testing of a new composite material that combines properties of homogeneous materials with those of carbon...
224335560 Mass customization: some trends and research.  
This paper presents an overview of some aspects of the current research in the field of mass customization worldwide. In the first chapter, general information about some fields of interest...
224335559 Analyzing STEP implementations for automated process planning.  
The response time to customer requests, next to costs or delivery reliability, in a B2B environment is one key factor for gaining purchase orders. Therefore, the authors develop a new model to...
224335558 Optical monitoring and control of drying processes.  
Colour is one of the most important criteria for the quality of food products. It does not only influence its subjective appreciation by the consumer but can also be used for the determination of...
224335557 Reliability prediction for man-machine production lines.  
Reliability prediction plays a very important role in system design and evaluation. In order to accurately predict the system reliability, one should consider the system configuration and the...
224335556 Frictional contact problems solved by numerical methods.  
The theory of non-smooth analysis shows that many results of standard analysis may be extended to a more general, non-smooth framework. In this paper we present some definitions and results...
224335555 Computer Aided education in area of Automatic Control--CAAC information system.  
This paper is deals with a presentation of the CAAC (Computer Aided Automatic Control) information system. This information system has a modular structure and it is open so that it is possible to...
224335554 Possibilities the rolling reduction by referencing direction with suspension correlation.  
In this paper, the important error induced by wheel suspending mechanism from rolling movement is reduced by means of solution proposed. This particular case we considered the elements that have...

Matches 1 - 50 out of 150 1 2 3 >