AcclaimIP-ad

Match Document Document Title
310520261 In situ encapsulation of hydrogel in ultrafine fibers by suspension electrospinning.  
Composite ultrafine fibers of hydrogel/polylactide copolymer were successfully electrospun from water-in-oil suspensions. Effects of the suspension composition on the morphology and microstructure...
310520260 Solution behavior of two novel anionic polyacrylamide copolymers hydrophobically modified with N-benzyl-N-octylacrylamide.  
Two novel hydrophobically modified anionic polyacrylamides (HM-PAMs), P(AM/NaA/NaAMC12S/BOAM) and p(AM/NaA/OP-10-AC/BOAM) have been prepared by an aqueous micellar copolymerization technique...
310520259 An optimization method with experimental validation for the design of extrusion wire coating dies for a range of different materials and operating conditions.  
The objective of this article is to determine a wire coating-hanger melt distributor geometry to ensure a homogenous exit velocity distribution that will best accommodate a wide material range...
310520258 Effect of titanium dioxide nanoparticles on polydimethylsiloxane/polyethersulfone composite membranes for gas separation.  
Introducing inorganic nanoparticles into the structure of polymeric membranes is an interesting approach for the enhancement of physical, chemical, and separation properties of the membranes. In...
310520257 Experimental analyses of the poly(vinyl chloride) foams' mechanical anisotropic behavior.  
Assessing a full set of mechanical properties is a rather complicate task in the case of foams, especially if material models must be calibrated with these results. Many issues, for example...
310520256 Rheological behavior of cycloolefin copolymer/graphite composites.  
In this study, morphological and rheological properties of cycloolefin copolymer (COC)/graphite composites prepared in a twin screw extruder by using various amounts of graphite (G) and expanded...
310520254 In situ fourier-transform infrared spectra analysis of hydrogen bond in polypropylene/chlorinated polypropylene/polyaniline composite.  
The previous studies suggest that hydrogen bond between chlorinated polypropylene (CPP) and polyaniline (PAN I) plays a prominent role in the decision of polypropylene/CPP/PANI composites'...
310520253 Modification of lignin and its application as char agent in intumescent flame-retardant poly(lactic acid).  
Urea-modified lignin was prepared according to the Mannich reaction and well characterized by Fourier transform infrared spectrometer, elemental ananlyses, and scanning electron microscopy (SEM)....
310520252 Effect of clay on the corrosion inhibition and dynamic mechanical properties of epoxy ester-polyurea-polysiloxane hybrid coatings.  
The corrosion resistance of polymeric coatings containing epoxy ester, polyurea, and polymethylhydrosi-loxane was significantly improved by the addition of cloisite 15A organoclay. The weight...
310520251 New epoxy thermosets obtained from diglycidylether of bisphenol a and modified hyperbranched polyesters with long aliphatic chains cured by diisocyanates.  
Hyperbranched polyesters modified with long aliphatic chains with vinyl or epoxy groups as chain ends were synthesized and added as modifiers to diglycidyl ether of bisphenol...
310520250 Diallyl-1,12-diaminododecane-based cyclopolymers and their use as inhibitors for mild steel corrosion.  
A variety of N, N-diallyl compounds, capable of undergoing cyclopolymerization, are prepared from 1,12-dodecanediamine. Selective monoformylation followed by allylation of the parent diamine...
310520249 Block copolymer alignment method for mobility anisotropy and enhancement of poly(3-hexylthiophene) thin-film transistors.  
In this article, a new alignment-layer approach based on block copolymers (BCPs) is proposed for mobility anisotropy and enhancement of organic thin-film transistors (OTFTs). In particular,...
310520248 Modification of surface wettability of sodium lonomer sheets via atmospheric plasma treatment.  
310520247 Modification of styrene-ethylene/butylene-styrene copolymer microstructure by polystyrene homopolymer and evolution of a cocontinuous blend morphology.  
Styrene-ethylene/butylene-styrene (SEBS) copolymer was blended with the homopolymer polystyrene (hPS) in a counter-rotating twin-screw extruder to prepare hPS/SEBS blends. The morphology of the...
310520246 Polyvinylidene fluoride/poly(ethylene terephthalate) conductive composites for proton exchange membrane fuel cell bipolar plates: crystallization, structure, and through-plane electrical resistivity.  
Polyvinylidene fluoride/poly(ethylene terephthalate) (PVDF/PET)-based composites for proton exchange membrane fuel cell bipolar plates (BPs) were prepared at different crystallization temperatures...
310520245 Correlating mechanical and electrical properties of filler-loaded polyurethane fluoroelastomers: the influence of carbon black.  
The dynamic mechanical properties and electrical conductivity of a class of polyurethane fluoroelastomers filled with different carbon black types and loadings were investigated. In particular,...
310520244 Biodegradation of plastified starch obtained by corotation twin-screw extrusion.  
The potato starch has been subjected to plastification with glycerol using twin-screw extruder in different conditions. The structure of obtained samples has been determined by Fourier...
310520243 Investigation of thermomechanical properties and matrix-filler interaction on polyimide/graphene oxide composites.  
We report, the preparation of nanocomposites having polyimide (PI) as matrix and graphene oxide (GO) as filler, analyses of matrix-filler interactions, and enhancements in thermomechanical...
310520242 Toughening of polyvinylchloride by methyl methacrylate-butadiene-styrene core-shell rubber particles: influence of rubber particle size.  
An analysis was made on the effects of rubber particle size on the mechanical properties and deformation mechanisms of transparent polyvinyl chloride (PVC) blends containing core-shell...
310520241 The mechanisms and mechanics of the toughening of epoxy polymers modified with fullerene [C.sub.60].  
This study examined the effect of fullerene [C.sub.60] on the mechanical properties of epoxy-based polymer nano-composites with different [C.sub.60] loadings. Mechanical testing shows that...
310520240 Crystallization behavior and mechanical strength of poly(butylene succinate-co-ethylene glycol)-based Nanocomposites using functionalized multiwalled carbon nanotubes.  
Biodegradable poly(butylene succinate-co-ethylene glycol) (PBSG)/multiwalled carbon nanotube (MWCNT) nanocomposites were successfully prepared through physical blending and silication between PBSG...
310520239 Role of 2-hydroxyethyl end group on the thermal degradation of polyethylene terephthalate and reactive melt mixing of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends.  
In an attempt to minimize the acetaldehyde formation at the processing temperatures (280-300[degrees]C) and the outer-inner transesterification reactions in the poly (ethylene...
310520238 Rotational molding of polyethylene composites based on agave fibers.  
In this study, agave fiber/linear medium density polyethylene composites were manufactured by rotational molding. A laboratory scale biaxial machine was used, where the internal air temperature...
309315326 Thermorheological properties of poly [epsilon]-caprolactone/polylactide blends.  
Blends of poly ([epsilon]-caprolactone) (PCL)/polylactide (PLA) were prepared by solution-casting method to study their thermal and rheological properties. Differential scanning calorimetry...
307804199 Polymer Engineering & Science.  
307804198 Effect of accelerated ultraviolet and thermal exposure on nanoscale mechanical properties of nylon fibers.  
Nanoindentation using atomic force microscopy was used to examine the mechanical properties of fibers at nanoscale. The effect of accelerated aging of nylon fibers under ultraviolet (UV)...
307804197 Synthesis, thermal polymerization, and properties of benzoxazine resins containing fluorenyl moiety.  
Three difunctional fluorene-based benzoxazine compounds were synthesized via Mannich condensation and were characterized by proton nuclear magnetic resonance spectroscopy ([.sup.1]H NMR),...
307804196 Synthesis of modified silica spheres used for the preparation of dual ultraviolet- and thermo-cured epoxyacrylate/silica composites.  
307804195 Mesua ferrea L. seed oil-based hyperbranched shape memory polyurethanes: effect of multifunctional component.  
The bio-based hyperbranched polyurethanes (HBPUs) have generated immense interest as advanced shape memory materials. In the present investigation, HBPUs were synthesized...
307804194 Properties and structures of novel cyanate ester/organic rectorite nanocomposites.  
Organic rectorite (OREC) was applied to bisphenol A dicyanate ester (BADCy) resin to develop a novel BADCy/OREC system. The influence of OREC on the reactivity of BADCy was discussed. The...
307804193 High-performance heat-sink composites incorporating micron-sized inorganic fillers and Sn/In metal particles.  
A novel thermal-barrier composite system was developed by incorporating fusible metal particles in the epoxy matrix system. Using the latent heat of melting, the Sn/In metal particles having...
307804192 Influence of carbon nanofibers reinforcement on thermal and electrical behavior of polysulfone nanocomposites.  
Carbon nanofiber (CNF) based polysulfone (PSU) nanocomposites have been developed successfully by a innovative solution mixing technique to explore the effect of state of dispersion and wt%...
307804191 Injection molding without prior drying process by the gas counter pressure.  
A processing technology that facilitates quality injection molding without prior drying of polymer pellets has been proposed. The main idea is not to let the water evaporate to bubbles inside the...
307804190 In situ polymerization of polyamide 66 nanocomposites utilizing interfacial polycondensation. III. Co-synthesis of silica nanocomposites via sol-gel chemistry.  
In situ co-synthesis of nylon 66 (PA66)-silica nanocomposites can be accomplished through sol-gel chemistry conducted simultaneously with the nylon polymerization. Unfunctionalized silica...
307804189 Synthesis of a core-shell polyacrylate elastomer containing ultraviolet stabilizer and its application in polyoxymethylene.  
A core-shell polyacrylate elastomer containing ultraviolet (UV) stabilizer was synthesized via semicontinuous seeded emulsion polymerization from butyl acrylate (BA), methyl methacrylate (MMA),...
307804188 Morphology, wettability, and mechanical properties of polycaprolactone/hydroxyapatite composite scaffolds with interconnected pore structures fabricated by a mini-deposition system.  
A new mini-deposition system (MDS) was developed to fabricate scaffolds with interconnected pore structures and anatomical geometry for bone tissue engineering. Polycaprolactone/hydroxyapatite...
307804187 Annihilation kinetics of color center in polycarbonate irradiated with gamma ray at elevated temperatures.  
Annihilation kinetics of color center in polycarbonate (PC), irradiated with gamma ray at elevated temperatures, was investigated. The transmission loss in the PC was monitored in the ultraviolet...
307804186 Nonlinear determination of the equilibrium melting temperature from initial nonreorganized crystals of poly(3-hydroxybutyrate).  
In this article a procedure for the determination of the equilibrium melting temperature ([T.sub.m.sup.0]) of polymers whose crystals reorganize during heating with a...
307804185 Synthesis of strong acid resins from macroporous styrene-divinylbenzene copolymers: is diluent extraction step necessary?  
Strong acidic cation-exchange resins derived from the same batch of styrene-divinylbenzene copolymers with and without acetone washing are compared with respect to ion-exchange capacity and...
307804184 Investigation of precipitated calcium carbonate as a processing aid and impact modifier in poly(vinyl chloride).  
The effect of ultra-fine precipitated calcium carbonate (PCC), with a primary particle size of 50 nm, on the fusion behavior and mechanical properties of Ca/Zn stabilized poly(vinyl chloride) PVC...
307804183 The influence of processing route on the structuring and properties of high-density polyethylene (HDPE)/clay nanocomposites.  
The effect of different processing routes on structure and properties of high-density polyethylene (HDPE)-clay nanocomposites was assessed. Different compatibil-izer/clay ratios ([alpha]) were...
307804182 Cure kinetics and thermal stability of micro and nanostructured thermosetting blends of epoxy resin and epoxidized styrene-block-butadiene-block-styrene triblock copolymer systems.  
The compatibility of styrene-block-butadiene-block-styrene (SBS) triblock-copolymer in epoxy resin is increased by the epoxidation of butadiene segment, using hydrogen peroxide in the presence of...
307804181 Synthesis of a novel flame retardant containing phosphorus and sulfur and its application in polycarbonate.  
A novel flame retardant containing phosphorus and sulfur, bis(2-tienyl)phenylphosphine (BTPP) was synthesized and characterized with Fourier transform infrared spectroscopy, [.sup.1]H, [.sup.13]C,...
307804180 Cyclic deformations of polypropylene with a strain-controlled program.  
Experimental data are reported on isotactic polypropylene in uniaxial tensile cyclic tests with a strain-controlled program (oscillations between fixed minimum and maximum strains). The...
307804179 Preparation and anti-icing property of a lotus-leaf-like superhydrophobic low-density polyethylene coating with low sliding angle.  
A lotus-leaf-like superhydrophobic low-density polyethylene (LDPE) coating with low sliding angle was prepared by a facile method. The water contact angle and sliding angle of the...
307804178 Effects of plasma treatment on greenhouse polyethylene cover aged under sub-Saharan conditions.  
The effects of natural ageing, in sub-Saharan regions, on treated low density polyethylene by cold plasma are presented in this work. The data analysis is performed by comparing the changes of...
307804177 Study of morphology, mechanical properties, and thermal behavior of green aliphatic-aromatic copolyester/bamboo flour composites.  
Aiming at development of completely biodegradable composite materials based on locally available low-cost bamboo flour (BF) as filler, structure properties correlations in...
307804176 Influence of [beta]-nucleation on polymorphism and properties in random copolymers and terpolymers of propylene.  
The competition between [alpha], [beta], and [gamma] polymorphs has been studied in several random copolymers and terpolymers of propylene, by performing X-ray diffraction and differential...
307804175 On the thermodynamics of solid solutions of polymer and salt.  
Solid solutions of poly(ethylene oxide) of different molecular masses ([m.sub.[eta]] from 6 x [10.sup.5] to 4 x [10.sub.6] g [mol.sup.-1]) and lithium perchlorate (LiCI[O.sub.4]) were prepared...
307804174 Influence of the critical concentration parameters on the morphology of chitosan scaffolds for chondrocyte culture.  
Chitosan-based membranes are widely investigated as scaffolds for tissue engineering applications, due to the biochemical and structural similarities between chitosan and the components of...