|
Match
|
Document |
Document Title |
|
|
6969543 |
Intermediate transfer blanket and method of producing the same
A multi-layered image transfer blanket and a method of producing same, including a body portion and an image transfer portion, the image transfer portion having an image transfer surface and a back...
|
|
|
6942909 |
Wrapping films with mating cling strips
A cling film system includes first and second film piles having different composition. Each film ply includes at least one cling layer and, desirably, one or more additional layers. Each film ply...
|
|
|
6936339 |
Carbon composites with silicon based resin to inhibit oxidation
A thermal protection system (TPM) for protecting a surface subject to high thermal load comprising a fiber substrate where the substrate is composed of woven or non-woven layers of fibers laminated...
|
|
|
6905744 |
Multilayered film and container
A multilayered film comprising five layers in which the first, third and fifth layers are made of an ethylene.α-olefin copolymer having a density of 0.930 to 0. 950 g/cm 3 and the second and...
|
|
|
6890633 |
Process for the continuous production of a preform mat, and a preform and its use
From about 50 to about 90% by weight of fibers, in particular wood fibers, and/or pellets made from cellulose or from wood, are mixed with from about 10 to about 50% by weight of a hot-curing...
|
|
|
6890622 |
Composite fluid distribution and fluid retention layer having selective material deposition zones for personal care products
An in-line formed, non-laminated web is suitable for use as a composite fluid distribution and fluid retention layer in a disposable absorbent article. The web can be formed by selective deposition...
|
|
|
6890621 |
Stretch blow receptacle and molding method of the same
Improve the strength of the stretch blow receptacle and make the heat resistant treatment easier, by making the receptacle wall cross-section multi-layered in view of crystalline density, and the...
|
|
|
6878432 |
Panel
A panel structure for a transport machine is disclosed which is constituted by an integral combination of an outer panel and an inner panel. The inner panel has reinforcing protuberances and...
|
|
|
6878466 |
Method for improving the reliability of brittle materials through the creation of a threshold strength
Reliable, flaw-tolerant brittle materials are produced by incorporating layers under residual compression on the surface and throughout the bulk of the material that act to trap and contain the...
|
|
|
6864418 |
Nanomagnetically shielded substrate
A shielded substrate assembly that contains a magnetic shield with a layer of magnetic shielding material; the magnetic shield has a magnetic shielding factor of at least about 0.5. The magnetic...
|
|
|
6824860 |
Thermoplastic composite reinforced thermoform and blow-molded article
The present invention provides a reinforced thermoform or blow-molded article, and the process for preparing the same, where the reinforcement is provided by a fiber-reinforced thermoplastic...
|
|
|
6805931 |
Plastic container coated with carbon film
A plastic container has a diamond like carbon film 20 b formed on the inner surface of the container 20 made of plastic material 20 a . The thickness of the diamond like carbon film 20 b is...
|
|
|
6803334 |
Absorbent article having fibrous layer on surface
Disclosed is an absorbent article including: a liquid permeable surface layer; a backing sheet; and an absorbent layer interposed between the surface layer and the backing sheet. The surface layer...
|
|
|
6797370 |
Thin-walled component made from hydraulically hardened cement paste material and method for the production thereof
The invention relates to a thin-walled component with a fine cement paste matrix and at least one steel wool mat that is pressed together and embedded in the fine cement paste matrix. The invention...
|
|
|
6787492 |
Filter cloth
The invention relates to a filter cloth intended for a filter which has a variable volume and is based on diaphragm extrusion, particularly for a Larox®-type vertical pressure filter. The...
|
|
|
6780501 |
Transparent thermoplastic composition containing polytetrafluoroethylene particles
The thermoplastic composition according to the invention for shaped light-scattering articles, based on a transparent thermoplastic formed from (meth)acrylic (co)polymer and on light-scattering...
|
|
|
6777064 |
Cleaning sheets, implements, and articles useful for removing allergens from surfaces and methods of promoting the sale thereof
An article of manufacture useful for removing allergens from surfaces comprises (a) a package; (b) cleaning sheet capable of removing allergens from surfaces; and (c) information to communicate the...
|
|
|
6726980 |
Acoustic doorliner with integral water barrier
An acoustical liner with integral water barrier is provided. The liner includes a pad of fibrous material having a lofty, acoustically insulating portion and at least one heat-seared face of...
|
|
|
6720069 |
Sound absorbing structure
A sound absorbing structure comprising at least one porous member including a plurality of holes, and the holes are at least one kind of through holes and non-through holes. It is preferable that a...
|
|
|
6686048 |
Composite carbonaceous heat insulator
A composite carbonaceous heat insulator which comprises a carbonaceous heat-insulating member having a bulk density of 0.1 to 0.4 g/cm 3 , a carbonaceous protecting layer having a bulk density of...
|
|
|
6680115 |
Glass fiber mats, laminates reinforced with the same and methods for making the same
The present invention provides a mat having at least one primary area and at least one secondary area and adapted to reinforce a polymeric matrix material, the mat comprising (a) a first layer...
|
|
|
6673418 |
Absorbent product having a non-woven fabric cover with a three-dimensional profile region
An absorbent article having a body-facing cover layer, a garment facing barrier layer and an absorbent element between the cover layer and the barrier layer. The cover layer is a non-woven fabric...
|
|
|
6670018 |
Net fabric to be processed into net product
A net fabric to be processed into a net product capable of simplifying processing during manufacturing of a net product, leading to a reduction in manufacturing cost of the net product is...
|
|
|
6656597 |
Laminated glass and glass plate used for producing laminated glass
A glass plate has a thickness of from 1.5 to 3 mm, and it has a peripheral region having a predetermined width along the edge line of the plate and having its principal stress difference of...
|
|
|
6652949 |
Method for producing fiber laminate, fiber laminate produced by the method, liquid reservoir containing the fiber laminate, and liquid-jet head cartridge having the reservoir
A fiber laminate production method includes a step of controlling an influence of gravity on a fiber absorber during thermoforming.
|
|
|
6649547 |
Integrated nonwoven laminate material
An integrated nonwoven laminate material suitable for use as a filter medium having a microfiber layer integrated with a low loft multicomponent spunbond layer and a high loft multicomponent...
|
|
|
6645604 |
Structures useful as cleaning sheets
Disclosed are cleaning sheets having at least two regions, where the regions are distinguished by basis weight. In particular, the cleaning sheet comprises one or more high basis weight regions...
|
|
|
6641893 |
Functionally-graded materials and the engineering of tribological resistance at surfaces
An article is provided that is highly resistant to localized normal indentation, or indentation tensile stresses, against its surface. The article is a stacked array of at least five layer units...
|
|
|
6623840 |
Protective flooring
A protective flooring tile, and method of manufacturing the same, having a durable and water resistant prefabricated top layer which is made of rubber material. The top layer has a top surface and...
|
|
|
6620527 |
Hillock-free aluminum wiring layer and method of forming the same
A hillock-free wiring layer and method of forming the same are provided. The wiring layer includes at least two aluminum (Al) layers formed on a substrate, and each of the Al layers includes Al...
|
|
|
6613422 |
Nitrogen -implanted, high carbon density overcoats for recording media
A method of forming a layer of a novel hard, abrasion and corrosion resistant, nitrogen-doped, high carbon density, amorphous carbon or hydrogenated carbon (C:H) protective overcoat material on a...
|
|
|
6607851 |
Multi-layer ceramic fiber insulation tile
A multi-layer tile material produced from layers of alumina enhanced thermal barrier material having different densities. The insulation layers are bound together by a high strength, high...
|
|
|
6602590 |
Lidding film for modified atmosphere packaging
The invention relates to high gas barrier packaging films exhibiting good shrinkage and containing an antifog composition for modified atmosphere packaging of foods and the like. The films are...
|
|
|
6592967 |
Microprism reflective sheeting with improved retention of reflectivity
Flexible retroreflective sheeting, and products therefrom, fabricated from an elastic substantially linear olefin polymer are found to exhibit significantly enhanced retention of retroreflectivity...
|
|
|
6586072 |
Acoustically effective insulating lining for motor vehicles
An insulating lining that is used as a floor covering and is especially useful in providing acoustic insulation. The insulating lining consists of a covering layer and a cell layer with a plurality...
|
|
|
6562429 |
Cushion material and cushion label
A cushion material which comprises a cushion sheet having a density of 0.05 to 0.65 g/cm 3 and a layer for receiving prints disposed on one face of the cushion sheet; and a cushion label which...
|
|
|
6531209 |
Suspension adhesive for bonding and sealing components in a light source
A suspension adhesive comprised of a matrix material and a particulate filler material is useful for bonding, sealing, repairing, and modifying ceramic, glass, and powdered metal components in a...
|
|
|
6528143 |
Multilayer material for plain bearing and method of making same
A multilayer material for sliding elements with a metallic backing layer and a plastics overlay applied thereto achieves good adhesion to the substrate without the disadvantages of known PVDF-based...
|
|
|
6514604 |
Migration inhibiting layer for a weatherstrip
A weatherstrip having a migration inhibiting layer including a butyl based elastomer, wherein the butyl based elastomer can include a blend of a halogenated butyl and EPDM. The migration inhibiting...
|
|
|
6511762 |
Multi-layer thermal barrier coating with transpiration cooling
A cooling system for cooling of the flow path surface region of an engine component used in a gas turbine engine and a method for making a system for cooling of the flow path surface region of an...
|
|
|
6497937 |
Wood based composite decking panel
An engineering wood based laminated panel for use as structural flooring for vehicle decking systems replaces a traditional hardwood decking and is cheaper plus having superior structural and wear...
|
|
|
6492286 |
Uniform meltblown fibrous web
Multilayer meltblown fibrous webs, as well as apparatus and methods of forming the webs. The webs are produced on a rotating collector that also moves parallel to its longitudinal axis. The webs...
|
|
|
6489015 |
Hardcoat film and antireflection film
A hardcoat film is provided which can improve surface hardness and, at the same time, can prevent the hardcoat film per se from being damaged by stress concentration and is less likely to be...
|
|
|
6479127 |
Manufacture of multi-layered board with a unique resin system
The present invention relates to the manufacture of a multi-layered board having a stable, and moisture-resistant surface. To accomplish this and other advantages of the invention, an improved...
|
|
|
6465109 |
Packaging films
A film suitable for spiral packaging is highly sealable and provides a strong self-adhesiveness of the front and reverse sides of superposed films upon spiral packaging. The film includes two...
|
|
|
6464831 |
Method for making paper structures having a decorative pattern
A paper web and method of making the paper web are disclosed. The paper web has a background portion and a non-embossed decorative pattern. The decorative pattern has at least one high basis weight...
|
|
|
6455147 |
Reaction injection-molded foam moldings
A reaction-injected foam molding comprising a skin coating film formed by the in-mold coating method and having an elongation at break of 20-200% (JIS K 6400: No. 1 dumb-bell test specimen) and a...
|
|
|
6447892 |
Lidding film for modified atmosphere packaging
Improved packaging films, which are shrinkable, high gas barrier films containing an antifog composition for modified atmosphere packaging of foods and the like. The films are useful for producing...
|
|
|
6440534 |
Interior trim components for motor vehicle
An interior trim component ( 100 ) for an automobile comprising a structure formed from at least one polyolefin material and reinforcement particles dispersed within the at least one thermoplastic...
|
|
|
6413613 |
Automotive headliners and related articles
An automotive interior trim product, for example a headliner, and method of producing such a product. The product comprising an energy management element which is adapted to be secured to an...
|